ar-15 Rifle Scopes & Sights

Smith Wesson Model 59

I have for sale a Smith Wesson Model 59 semi-auto pistol in 9mm. Has adjustable three-dot sights, ambidextrous safety/decock lever, and 95%+ blued finish. Comes with two 14-rd. mags, tactical holster, and owners manual. Overall great condition. No operational issues. Selling for $280 which includes shipping. FTF transfer in S. Central PA a possibility. I have pictures available upon request. Email me at sawgunner365@yahoo.com if interested, and for photos. Thanks.

mspasfeh039

-

AR-15 Gun Supplies

Ok, lets cover the necessary tools. What you need:

Since this procedure requires removal of the barrel/barrel nut, you will need many of the same tools as listed in the Step by step guide to building a complete upper, above.

See the above post… but to sum it up, you will need a good action block, armorers AR-15, 1/16″ punch, snap ring pliers, moly-grease, and a vise.

You will also need a couple punches. You just need a good sized (1/4″) soft brass punch and a steel 1/8″ punch.

(allen wrench and blue loctite supplied with tube!)

That s it for tools! Now here are the step-by-step instructions:

1. Remove the upper from the rifle. Remove the handguards. Remove the muzzle device. Remove the front sight base. Unscrew the factory barrel nut and remove the nut, and delta ring assembly (we wont be needing these)

To mount a LaRue tube, the “keeper” (anti-roll device) plate will interfere with the action block I was using. It required I take a dremel and cut out a notch to accomodate this. I am not sure if it was required…. I cannot tell if this can be slipped in after the fact…. YMMV.

mspmwg53

Ruger sp101

Does changing the hammer on this revolver require Ruger sp101? I’d like to change out the factory spur hammer for a spurless one. Can that be done at home or is it a trip to the gunsmith?

I asked this in the Ruger forum over a week ago and got no responses. Just curious.

Thanks,
M

mspasfeh037

-

Para Ordnance p 12

At that point, I put it back together, cleaned it up. And the next day promptly returned it to the dealer. I looked at another example he had (hoping this was an isolated incident) and it too suffered from the same problem.

mspasfeh028

-

Colt 1911

I want to make something happen. I always try to be fair in my dealing. I understand FN is no longer going to import the Hi Power; take that for what it’s worth in the effect on values.

Well I think I lost it. I offered to buy a Colt 1911 and Colt 1903 sight unseen the other day. The price seemed right so what the hell. Well the gentleman showed up with it and I bought it. I have to say I’m not a fan of nickle plating but it’s growing on me.
I can’t figure out the barrel set up. The barrel sticks out the front a half inch? It looks like a bull barrel with no bushing. The guide rod is a full length one in blued.
What should I do with it?
1) shoot the living tar out of it?
2) Find the proper parts and return to stock?
3) Is there a way to change the finish on this or is the nickle finish permanent?
4) Pimp it out with these?

mspasfeh012

-

AR-15

Mounting Solutions Plus (MSP) is a distributor of A.R.M.S. Mounts , PRI, AIMPOINT Comp Scopes and other high quality shooting products for the discriminating shooter in the varmint, competition and tactical disciplines. Our line of bases and rings are without peer and will team most popular bolt actions to the finest scopes. Also included are mounts for reflex or red dot sights; such as, the Holosight and the Aimpoint Comp.

mspasfeh053

-

AR-15

The Bushmaster Carbon AR-15 Type 21S pistol has top of the line features of the popular Type 97S rifle in a package that weighs less than three and a half pounds. The upper and lower receivers are molded of state of the art Carbon Fiber 15 material that offers incredible durability, strength and ultra-light weight. The pistol s 7 1/4″ stainless steel, match grade barrel is chambered for the 5.56 NATO cartridge and readily accepts the .223 Remington cartridge as well.

mspasfeh058

-

AR-15

This top quality AR-15 Bushmaster Carbine was developed for the shooter who intends to immediately add optics (scope, red dot or holographic sight) to the rifle - as it is shipped without iron sights. Various add-on rear iron sights can be easily attached to the flat-top Upper Receiver, and Bushmaster s BMAS Front Flip-up Sight for V Match Rifles (Part # YHM-9360K) can be mounted over the Milled Gas Block. The premium 16 M4 Profile Barrel is chrome lined in both Bore and Chamber to provide Bushmaster accuracy, durability and maintenance ease.

mspasfeh057

-

Browning Buckmark

FTF in Florida as I don’t need the FFL and shipping hassles (and costs)
(5) LN factory Browning Buckmark mags $SPF shipped
(3) Ruger MKI-II mags (1-Factory red, 2 Mcgar) $SPF shipped

The ONLY trades I am interested in are new p 93 ruger MKIII mags.

Prices are shipped.
MO only, NO PAYPAL!!!
Will ship USPM as soon as funds arrive.
Sold as lots only.
All mags are like new.
Thanks
CHAnybody ever heard of this happening?

mspasfeh019

-

Para Ordnance p 12

At that point, I put it back together, cleaned it up. And the next day promptly returned it to the dealer. I looked at another example he had (hoping this was an isolated incident) and it too suffered from the same problem.

mspasfeh028

-

Colt Defender

Here’s the story:

Picked up a new Colt Defender two weeks ago. Went to the range, had some extraction problems; fairly random, but every 15 rounds, or so, the extractor would jump the rim and fail to extract. Get it home, check the extractor tension…is very weak. Well, no big deal, was going to have a local smith do a trigger job, so I figure Ill have him tune the extractor while it’s there.

I have two brand new sets of Colt original equipment grip panels with Colt gold medallion for a Colt Government model. They have been sitting in storage for the 380 colt mustang. $25 shipped for each pair, buy both sets for $45 shipped.

So, pick the pistol up today (great trigger job BTW) and head straight to the range. Same crap. Head straight back to the smith, he adjusts the tension again. Get home, strip the pistol and check the tension with the extractor in the pistol (using the loaded round/shake the slide method). The extractor barely grips WWB cases, and Corbon and Speer brass falls right out. Scratch my head.

At this point I pull out two other 1911s that I know have perfect extractors (est. 8000 rounds through both with no extraction issues); both Kimbers. I remove the extractors from both pistols, and check the Colt 25 extractor in both. Tension is perfect in both Kimbers. So, I then try both of the Kimber extractors in the Colt…same problem, no tension on the case. At this point I’m getting what the problem is. Nevertheless, just to be sure, I grab a spare extractor to play around with. No matter how much bend I put in the Colt 1903, it still will not grip the case any harder; I had that extractor bent pretty much sideways and it made no ruger p 85 other than barely being able to push it in the channel.

Visually it appears the Colt extractor channel was cut too far to the side of the slide for the extractor to be tensioned, regardless of how much it is bent. Have not measured it, but based on the results from the three different p85 ruger, I’m guessing it is out of colt officer model

Agree? If not, what is your theory?

mspasfeh020

-